LIFTING UP YOUR PRODUCTION
TO THE NEXT LEVEL

600 pixels wide image
190 pixel image width
WHAT IT IS ABOUT?
The production of telescopic jibs for (mobile-) cranes is a challenge where large forces meet highest precision. The jibs have the function of telescopic cylinders and are used on mobile cranes to lift and lower loads. Mobile cranes nowadays have a load capacity of up to 1200 tons and more. For this reason, materials are used that can withstand the high tensile loads. To move loads with gigantic weights with the highest precision above our heads and roofs, the machines in use must be able to withstand the highest requirements. 

Currently, these long jibs are manufactured in half-shell form by the press procedure, which leads to various disadvantages.
WEAKNESSES OF THE CONVENTIONAL SOLUTION
The main weakness of the conventional solution is the process speed during pressing. On one hand, the pressing time of half shells is high in this length range. On the other hand, compliance with the required dimensional tolerances is time-consuming. This leads to inefficient reworking.
NEW SOLUTION FROM HAEUSLER
HAEUSLER's new solution is to establish the bending procedure instead of the pressing procedure in the production of jibs of mobile cranes. For this process Haeusler recommends the use of the 3-roll bending machine type FKB. This innovative und fast process deforms the segment homogeneously. The increase in process output is achieved by raising precision and thus part quality. This makes reworking mostly obsolete, which results in a reduction in manufacturing costs. The machine is in addition equipped with electric direct drives and energy-saving hydraulics, which also reduces the machine's operating costs.
FKB
In HAEUSLER 3-roll bending machine type FKB, the top roll is supported over its entire length. In addition to higher precision in bending, the use of small top roll diameters is possible. This allows the bending of tight radii. For this unique solution, HAEUSLER developers have designed accessories such as roller conveyor, infeed and back tables that improve handling.
Once again HAEUSLER offers the best solution for our customers

The HAEUSLER machine offers the best TCO (total costs of ownership) and have the following unique features:

Highest productivity

Accelerates the manufacturing process and increases output.

Accurate manufacturing

Less rework by keeping closer tolerances.

Homogeneous deformation

Higher production performance.

Lowest energy consumption

HAEUSLER electric drive system (up to 50% power savings compared to conventional hydraulic drives).
For more INFORMATION visit 
HAEUSLER WEBSITE

Join us on SOCIAL MEDIA

facebook instagram youtube linkedin

Wird diese Nachricht nicht richtig dargestellt, klicken Sie bitte hier.
Haeusler AG Duggingen
Baselstrasse 21
4202 Duggingen
Schweiz

0041 61 755 22 22
info@haeusler.com

 

 


Wenn Sie diese E-Mail (an: unknown@noemail.com) nicht mehr empfangen möchten, können Sie diese hier kostenlos abbestellen.